RADIO CONTROL MODELS

Welcome

1/18 Scale Radio Control DRONE RACER ZEPHYR Smashing Yellow Readyset 20572Y
Excl. Tax: ¥26,000 Incl. Tax: ¥28,080

No : 20572Y

JAN : 4548565319466

On Sale From : March 2017

1/18 Scale Radio Control DRONE RACER ZEPHYR Smashing Yellow Readyset 20572Y

You may also be interested in the following product(s)

DRONE RACER glides above the ground with pistol-grip transmitter control.>
Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Intermediate and Beginner mode speed settings (Easy mode / Active mode) are available so you can experience the fun of drone flying at your own pace.



DRONE RACER gliders above the ground.

Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Now you can experience the fun of drone flying at your own pace.

Control with a pistol-grip R/C system.
Includes the latest 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced aircraft-like instrument panel. Flying height adjustment switch is installed on the base of the transmitter grip.

Readyset includes everything you need. Open the package then charge the battery to start flying.

BATTERY
3.7V-1000mAh Li-Po battery
Flight time /10 minutes approx.

USB CHARGER
Includes USB auto-cut charger.
Charging time / 1-2 hours
(depending on USB power supply output)

USB CABLE
Includes USB cable to connect the drone to a personal computer.

SPARE PROPELLER
Spare propeller(for one drone)

ARM HOLDER
Arm holder(10°, 20°)

TOOL
Pinion gear replacement tool and rear body mount



Dogfight only 35cm above the ground. Speeds over the ground just like aHoverboard. Newly developed drone technology.

The DRONE RACER is equipped with advanced ultrasonic sensors, 6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors), barometric pressure sensor and four fast response mini coreless motors. Speed switching function provides a choice between “Easy Mode” and “Active Mode” and delivers direct intuitive flight control.



LOW HEIGHT FLYING CONTROL

Patented


Altitude is automatically maintained with ultrasonic and barometric pressure sensors. Altitude setting of 35cm or 60cm can be selected with a switch on the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone can enjoy the fun of flying drones. *according to Kyosho research



Flies over any surface, even over water. Maintains constant altitude of 13inches (23 inches) using ultrasonic sensors.
VARIABLE PROPELLER UNIT STRUCTURE

Patented


H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a racing weapon.

KYOSHO DRONE CONTROL MIXING SYSTEM

Patented


Optimal roll and yaw mixing match control from the steering wheel.

DRONE BACKWARD CONTROL

Patented


Uses similar control movement as a car.



Kyosho DRONE RACER is not subject to the revised Japanese aviation law. This product can be enjoyed by anyone.

The DRONE RACER is not designed for high altitude performance, but for people to enjoy flying safely within their field of vision near the ground. A total safety system includes: removable propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates in case you lose control of the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY AUTO STOP SYSTEM” in case the radio signal is lost. Weighing only 130g, the DRONE RACER is not subject to the Japanese aviation law so you can fly freely anywhere you like (except in restricted areas).
*as at aviation laws 10th December 2015



Fast, beautiful and more powerful. Sophisticated masterworks.

Models are based on a futuristic impression of car with the narrow form and rear wings associated with formula racing cars.



Bright LEDs light up the fuselage. LEDs can be used as drone identifieres when racing.


Full color LED installed on front propeller units allows a selection from 6 colors. You can choose your favorite luminescent color to use as an identifier when racing.




Features rear LED with color indicator of propeller status.
Red : flashing indicates low battery warning, when lit indicates safety function is released & can operate as tail lamp
Yellow : transmitter not connected = RADIO EMERGENCY STOP
Green: flashing indicates detecting horizontal, when lit indicates ready to takeoff and safety function is activated
Blue : gyro calibration in progress



For easy front-rear identification the front mask features 2 bright white LEDs and the tail features red LED.

1. Infrared sensor(Lap counter)
2. LED color change/Calibration switch
3. Propeller angle change/Horizontal adjustment switch
4. SV external power port
5. Extension LED port
6. Micro USB port

Infinite Possibilities

DRONE RACER SETTING MANAGER

DRONE RACER can connect to your (Windows) computer with the included USB cable to adjust flight settings. In addition, an optional cable can also be used to connect to an Android terminal with a USB host function to adjust settings. Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.

Readyset includes everything you need. Open the package then charge the battery to start flying.

TECHNICAL DATA

■Length
302mm (with guard)
■Width
300mm (with guard)
■Height
65mm
■Gear Ratio
5 : 1
■Weight
130g approx.
■Motor
8.5mm coreless
■Battery
3.7V-1000mAh
■Propeller
D5 x P4
■Flight Time
10 min approx.
■Charging Time
1-2 hours (depending on USB power output)
■Max Speed
30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle setting)/38km/h approx. (when using optional parts)
■Energy density
318Wh/L (not subjected PSE)
■Flight altitude
Low 35cm/High 60cm approx. (setting can be changed using software application)

KIT CONTENTS
●Fuselage
●2.4GHz Transmitter KT-231P+
●USB auto cut charger
●Pinion gear replacement tool (combination binding stick)
●3.7V-1000mAh Li-Po battery
●Arm holder (10°, 20°)
●USB cable
●Spare propeller (for one drone)
●Quick start guide
●Instruction manual
REQUIRED FOR OPERATION
●4 x AA size batteries for transmitter
●Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within one hour)