Description
Le Mans 240S ESC is optimized for Le Mans 240S brushless motors. This new design locates all 6 FETs on the base and uses fins shaped into the underside of the aluminum case to dissipate heat and negate the need for a cooling fan. In addition to its excellent heat control and durability, the hard aluminum case is finished with nickel plating and lazer etched with the “LE MANS 240S” and “KYOSHO” logos. With all 14-gauge wires covered in black silicon, the design aligns its superior performance with quality presentation. Using a superplug (Deans) battery connector, the compact design eliminates difficult wiring with the capacitor built into the case. The simple design also allows six setting parameters to be set with only the Set key, without using the program card. *1: Sensor cable is not included. Please purchase separately. *2: Standard lengths of the sensor cables are as follows (according to ESC mounting position). - TF-7/ FAZER/ PLAZMA F1 -> 100mm - PLAZMA Lm/ PLAZMA Ra/ Gambado R246 -> 150mm - OPTIMA/ TOMAHAWK -> 170mm - SCORPION/ BEETLE -> 190mm
Technical Data
連続最大電流:60A
瞬間最大電流:80A
最大KV値(2S):13.5T 3200KV
(3S):15.5T 2200KV
走行モード:前進/ブレーキ
前進/ブレーキ/後進
入力電圧:7.2V-11.1V 6S NiMH/3S LiPo
モータータイプ:センサー&センサーレス 2極/4極
BEC出力:6V/2A
サイズ(mm):37.5×30.8×18.7
重量(g):約80
Kit Content
Requirement to Run
Movie
Product Showcase
Reviews
Find Store