English 
日本語 
My Cart
You have no items in your shopping cart.
Now Loading...
2021 TOYOTA TACOMA TRD PRO
Enjoy powerful pickup truck performance In realistic 1/10 scale!
Enjoy powerful pickup truck
performance In realistic 1/10 scale!
ULTRA-SCALE BODY
Sharper edged parts that are difficult to reproduce in polycarbonate are injection molded using impact-resistant material for improved durability.
Light buckets can also be equipped with an optional LED series (max 4 x front and 4 x rear lights).
Light buckets can also be equipped with an optional LED series (max 4 x front and 4 x rear lights).
Form of the fender has been accentuated from true scale and the roof setting has been slightly lowered so you can enjoy the dynamic driving experience of the KB10L’s wide chassis.
BODY MOUNT
Body mounts on front and rear secure the body from under the chassis (photo shows front) so scale appearance is not compromised by exposed body pins on the outside of the body.
New Chassis
KB10L MAIN CHASSIS
Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. Newly designed long aluminum chassis produces reliable traction even on low-grip surfaces.
SUSPENSION
Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Extendable resin universal shafts on the lower suspension arms are interchangeable between front and rear for parts and maintenance efficiency.
Lower positioning of the front and rear differential gears combines with increased ground clearance for dynamic performance over rough roads.
CENTER DIFF. GEAR
Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part. (One BRG005 bearing is required separately.)BEVEL DIFF. GEAR
Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear for the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part. (BRG005 bearing is required separately.)
OIL SHOCKS
Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis.TIRE & WHEEL
Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale.THE BRUSHLESS MOTOR & ESC
BRUSHLESS
MOTOR
SPEED
CONTROLLER
STEERING
SERVO
OPTIONAL PARTS
Front grille compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, improves scale realism for body shell.
KT-231P+ TRANSMITTER
Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral. [ 1 ]Steering Trim<
Adjusts the steering in small increments so the model will run straight. [ 5 ]Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides. [ 2 ]Steering D/R Adjuster
To adjust Steering Angle [ 4 ]LED Indicator
When the power is switched ON, both LED lights will light up. [ 3 ]Steering Wheel
Turn model to left or right. [ 6 ]Throttle Trigger
Controls forward movement and braking functions. [ 7 ]-
[ 1 ] Throttle Trim
Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral. -
[ 2 ] Throttle End Point Adjust
Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides. -
[ 3 ] LED Indicator
LED Indicator
When the power is switched ON, both LED lights will light up. -
[ 4 ] Steering D/R Adjuster
Steering D/R Adjuster
To adjust Steering Angle -
[ 5 ] Steering Trim
Steering Trim
Adjusts the steering in small increments so the model will run straight. -
[ 6 ] Steering Wheel
Steering Wheel
Turn model to left or right. -
[ 7 ] Throttle Trigger
Throttle Trigger
Controls forward movement and braking functions.
VEHICLE SPEC
>
Technical Data
| Scale | 1/10 |
|---|---|
| Length | 572mm (22.5 in.) |
| Width | 274mm (10.8 in.) |
| Height | 214mm (8.4 in.) |
| Chassis Type | Shaft Drive 4WD |
| Wheel Base | 340mm (13.4 in.) |
| Tread | 224mm(F/R) (8.8 in.) |
| Weight | 3,410g |
| Gear Ratio | 10.41：1 |
|---|---|
| Tire | φ110×47mm（F/R） |
| Motor | TORX 10L 2850KV |
| ESSC | BRAINZ 10+ |
| RC System | KT-231P+ |
| Approximate Speed | 75km/h |
| Approximate Run Time | 8 mins |
Readyset contents
- ●Factory assembled chassis complete with control linkages
- ●Pre-cut and painted body complete with decals applied
- ●2.4GHz Syncro KT-231P+ transmitter
- ●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm)
- ●Cross wrench
- ●4/5/5.5/7/10mm wheel wrench
Required For Operation (Not Included)
- ●AA-size batteries x 4 for transmitter
- ●Battery for chassis x 1 (2-3S Li-Po battery *Installable battery size 143 × 47 × 30mm)
- ●Charger for chassis battery
