Now Loading...
1/8 Scale 4x4 Radio Controlled Monster Truck USA-1 readyset
What is USA-1 Monseter truck?




The only question is which one; Nitro or Brushless electric power?
The famous USA-1 rides high again with this latest 1:8-scale model produced under license of the USA-1 4X4 Monster Truck team. The completely new Ultra-Scale body has been recreated with the precision details that uniquely make it the USA-1 Monster Truck. It sits atop a modified super-tough chassis equipped with a realistic and robust solid axle suspension front and rear, which can be converted to 4-wheel steering with some optional parts. With modern power systems to match the USA-1 in both name and performance, this package sets new standards of brute power compared to the original Kyosho USA-1 RC trucks. The only question is which one; Nitro or Brushless electric power?
Everett Jasmer emerged from this rivalry as one of the God Fathers of Monster Trucks.

In the early seventies, auto makers began to offer four-wheel drive in passenger trucks where it had previously just been available in agriculture and industry. It wasn't long before enterprising performance enthusiasts like Everett Jasmer and a small handful of others started modifying their trucks for increasing levels of performance. This was the genesis of a friendly rivalry that, over time, would motivate an escalation of performance and innovation that eventually led to what we know today as the Monster Truck. Everett Jasmer emerged from this rivalry as one of the God Fathers of Monster Trucks, and the USA-1 as one of the most revered Monster Trucks of all time. It remains one of the inspirations for modern monster trucks and their fans around the globe even to this day.
eventually led to what we know today as the Monster Truck. Everett Jasmer emerged from this rivalry as one of the God Fathers of Monster Trucks, and the USA-1 as one of the most revered Monster Trucks of all time. It remains one of the inspirations for modern monster trucks and their fans around the globe even to this day.


MOVIE
MOVIE
Kyosho immortalizes one of the greatest trucks to inspire the phrase "Monster Truck" with an all-new version of the USA-1 as an Ultra-Scale body.

Using the famous team USA-1 monster truck as the blueprint, Kyosho immortalizes one of the greatest trucks to inspire the phrase "Monster Truck" with an all-new version of the USA-1 as an Ultra-Scale body. In addition to its stunning details, it also features easy installation of optional LED light sets that help bring an even higher level of USA-1 realism to the RC community.
Highly body detailed: Injection-molded parts such as the headlights,Front grille heavy-duty chrome bumper,off-road light.







for a total of 15 lights.



Highly body detailed: realistic carburetors,clear windows, chrome side mirrors,monster tires.



The chassis of the KYOSHO MONSTER TRUCKS USA-1.
The chassis of the KYOSHO MONSTER TRUCKS USA-1 GP.

The chassis of the USA-1 is unique in that the axles and suspension links have all been modified to be thicker and stronger than those originally seen on the Mad Crusher. The chassis, with its solid axles, produces a more authentic driving experience with characteristics that are comparable to the real USA-1. The wheelie bar present on both versions of the truck, is essential given the large amount of power available regardless of which version, nitro or brushless electric, is chosen. It's really not for show.
The chassis of the KYOSHO MONSTER TRUCKS USA-1 VE Brushless Electric.

The chassis of the USA-1 is unique in that the axles and suspension links have all been modified to be thicker and stronger than those originally seen on the Mad Crusher. The chassis, with its solid axles, produces a more authentic driving experience with characteristics that are comparable to the real USA-1. The wheelie bar present on both versions of the truck, is essential given the large amount of power available regardless of which version, nitro or brushless electric, is chosen. It's really not for show.
KYOSHO MONSTER TRUCKS USA-1 RIGID AXLE SUSPENSIONS





KYOSHO MONSTER TRUCKS USA-1 GP:Equipped with the new KE25SP2 engine.

Equipped with the new KE25SP2 engine, the easier-to-adjust low-speed needle produces more power than the previous KE25SP engine. Fitted with a pull starter, the engine settings have been optimized at the factory. You'll also enjoy the exhilarating growl of the engine through the polished, light-weight tuned pipe.
KYOSHO MONSTER TRUCKS USA-1:3PCS Clutch,3-Speed Transmission,Disc breake,Drive shaft






KT-231P+ Transmitter,Waterproof servo,Protective radio box


Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral.Steering Trim
Adjusts the steering in small increments so the model will run straight.Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides.Steering D/R Adjuster
Turn model to left or right.LED Indicator
When the power is switched ON, both LED lights will light up.Steering Wheel
Turn model to left or right.
Throttle Trigger
Controls forward movement and braking functions.
Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral.Steering Trim
Adjusts the steering in small increments so the model will run straight.Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides.Steering D/R Adjuster
Turn model to left or right.LED Indicator
When the power is switched ON, both LED lights will light up.Steering Wheel
Turn model to left or right.Steering Wheel
Controls forward movement and braking functions.KYOSHO MONSTER TRUCKS USA-1 VE Brushless Electric: The New brushless Motore & Esc.


The newly-developed brushless motor in the USA-1 generates 300rpm more per volt than the previous version motor. In addition, the waterproof ESC (speed controller) with maximum voltage of 14.8V (2 x 2S Lipo packs), allows setting adjustment of braking power, punch force, cutoff voltage, etc.
Equipped with the newly-developed brushless“KYOSHO SPEED HOUSE TORX 8+(2300KV)” motor and “KYOSHO SPEED HOUSE BRAINZ 8” waterproof ESC (speed controller) .




KT-231P+ Transmitter,Waterproof servo,Protective radio box


Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral.Steering Trim
Adjusts the steering in small increments so the model will run straight.Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides.Steering D/R Adjuster
Turn model to left or right.LED Indicator
When the power is switched ON, both LED lights will light up.Steering Wheel
Turn model to left or right.
Throttle Trigger
Controls forward movement and braking functions.
Throttle Trim
Adjusts the throttle in small increments so the model will not move at neutral.Steering Trim
Adjusts the steering in small increments so the model will run straight.Throttle End Point Adjust
Adjusts the amount of movement to the forward and brake sides.Steering D/R Adjuster
Turn model to left or right.LED Indicator
When the power is switched ON, both LED lights will light up.Steering Wheel
Turn model to left or right.Steering Wheel
Controls forward movement and braking functions.KYOSHO MONSTER TRUCKS USA-1 OPTIONAL PARTS


4WS Conversion set,Universal swing shaft set,CNC Wheelie tire set

(MAW023)
A full-size monster truck in action is a sight to behold. With optional parts, this USA-1 model can be converted into a 4WS machine.

(MAW019)
Internal universal drive shafts for the front and rear axles deliver increased drive efficiency, durability, and easier maintenance. One set includes two shafts, one each for the left and right sides of one axle. Two pair are needed to convert both ends of the truck.
(Front: MAW028GM / Rear: MAW029GM)
Changing the chassis mount for the lateral rods to aluminum increases strength to withstand even harder driving.

(MAW020)
The adjustable wheelie bar helps prevent the truck from flipping over backward under hard acceleration, and assists in riding an awesome wheelie over long distances. Made of machined, anodized aluminum.

KYOSHO MONSTER TRUCKS USA-1 GP Nitro Spec


KYOSHO MONSTER TRUCKS USA-1 GP Nitro Spec Technical Data and Readyset Contents

Scale | 1:8 |
---|---|
Length | 570mm (22.4 in.) |
Width | 450mm (17.7 in.) |
Height | 281mm (11.1 in.) / 300mm (11.8 in.) with optional Light Bar LEDs |
Chassis Type | Shaft Drive 4WD |
Wheel Base | 360mm (14.2 in.) |
Tread | Front: 339mm (13.3 in.) / Rear: 343mm (13.5 in.) |
Weight | 4,990g |

Engine | KE25SP2 |
---|---|
Gear Ratio | 1st: 25.7:1 / 2nd: 19.8:1 / 3rd: 15.6:1 |
Axle ratio | 3.308:1 (Ring Gear:43T / Pinion gear: 13T) |
Tire diameter and width | 164 x 104mm (6.5 x 4.1 in.) |
Receiver Batteries | Four (4) AA-size |
RC System | KT-231P+ |
Approximate Speed | 63km/h |
Approximate Run Time | 9 mins |
※GPの重量は燃料を含まない状態です。※走行時間は走行条件により異なります。
<Readyset Contents>
- Factory assembled chassis complete with control linkages
- Pre-cut and painted body complete with decals applied
- 2.4GHz Syncro KT-231P+ transmitter
- L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
- Cross wrench (large)
- 17mm wheel wrench
<Required for Operation>
- AA-size batteries x 4 for transmitter
- AA-size batteries x 4 for receiver
- Fuel bottle
- Plug heater
- Fuel
KYOSHO MONSTER TRUCKS USA-1 VE Brushless Electric Spec


KYOSHO MONSTER TRUCKS USA-1 VE Brushless Electric Spec Technical Data and Readyset Contents

Scale | 1/8 |
---|---|
Length | 570mm (22.4 in.) |
Width | 450mm (17.7 in.) |
Height | 281mm (11.1 in.) / 300mm (11.8 in.) with optional Light Bar LEDs |
Chassis Type | Shaft Drive 4WD |
Wheel Base | 360mm (14.2 in.) |
Tread | Front: 339mm (13.3 in.) / Rear: 343mm (13.5 in.) |
Weight | 5,040g |
Gear Ratio | 8.68:1 |

Motor pinion and spur gears | Motor pinion: 16T / Spur gear: 42T |
---|---|
Axle ratio | 3.308:1 (Ring Gear:43T / Pinion gear: 13T) |
Tire diameter and width | 164 x 104mm (6.5 x 4.1 in.) |
Motor | TORX 8+ 2300Kv |
ESC | BRAINZ 8 |
RC System | KT-231P+ |
Approximate Speed | 57km/h |
Approximate Run Time | 9 mins |
※走行時間は走行条件により異なります。
<Readyset Contents>
- Factory assembled chassis complete with control linkages
- Pre-cut and painted body complete with decals applied
- 2.4GHz Syncro KT-231P+ transmitter
- L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
- Cross wrench (large)
- 17mm wheel wrench
<Required for Operation>
- AA-size batteries x 4 for transmitter
- Battery for chassis x 1 or 2 (7.2V Ni-MH or 7.4V Li-Po)
- Charger for chassis battery