It has a torque of 6kg (at 5V) and is standard equipment on Kyosho's 1/10 scale Readyset. A servo grommet is also included to protect the servo from engine vibration when installed on an engine model. The servo cord length is 220mm, so it can be used with almost all models.
■ Operating voltage: 5 to 6V (Li-Fe 6.6V and Li-Po 7.4V are not supported when power is taken from other than ESC) ■ Dimensions: L40.4mm W20.4mm H41.5mm ■ Speed: 0.15sec/60°(at 6V) 0.17sec/60°(at 5V) ■ Torque: 7kgf-cm(at 6V) 6kgf-cm(at 5V) ■ Weight: 60g ■ Lead wire: 220mm ■ Serration: 25/ for KYOSHO and FUTABA ■ Control: Digital