ULTIMA RB6.6 1/10 EP 2WD Buggy KIT 34302
Cutting edge 2WD racing buggy technology excels on ultra high-grip surfaces with 3 transmission types including a newly developed lowdown gearbox.
After the IFMAR Electric Off-Road World Championship in Ultra high grip surfaces such as artificial turf and carpet have become mainstream in off-road racing since the 2015 IFMAR Off-Road World Championships run at Yatabe Arena in Ibaraki, Japan. To stay ahead of these constantly evolving trends, Kyosho’s Ultima RB6 has been updated into the new 6.6 model. While maintaining the superiority of the proven suspension and steering in the RB6, the new 6.6 model features a selection of 4 different gearboxes: “Rear Motor”; “3 Gear Midship”; “4 Gear Midship”, and “Lowdown Midship”. In addition to the ever-reliable rear motor for looser surfaces, the 6.6 features midship transmissions for higher grip dirt surfaces and a newly designed lower C of G lowdown midship transmission for ultra high-grip surfaces such as artificial turf and carpet. With detailed precision setting capability, this single machine is compatible with any surface type that a racer is required to drive on. Also, the wider 7075-T6 grade main chassis with side guards is unchanged to deliver the cornering advantages of its width. When using the midship layout, either straight or sideways battery mounting orientation can be used to fine-tune the chassis weight distribution effect on running performance.
・Features upgraded specifications based on the Ultima RB6 (No.34301) model released on May in 2015. ・Highly adaptable chassis settings with choice of lowdown midship motor, midship motor and rear motor configurations. ・Ball differential features long life and superior precision tungsten diff balls. ・Features one-piece wheel shafts made from high-strength steel. ・Clamp screw aluminum hex wheel hubs provide secure traction and precise rotation on the rear. ・Large capacity slipper clutch is compatible with high power motors. ・Gun metallic anodized aluminum parts produce a formidable looking finish. ・Includes X-GEAR ball diff grease, high graphite grease and shock springs.
Incorporates advanced specifications including: high rigidity 7075-T6 main chassis, surface-tracing Big Bore shocks and choice of motor layout.
With the RB6 model’s width, the 7075-T6 grade main chassis features increased rigidity and lower center of gravity to perform in both high-speed and high-grip race conditions.
Battery can be oriented straight or sideways (with midship layout) for precision adjustment of chassis weight distribution to suit the grip and layout of various racing courses.
Newly developed low down midship transmission lowers the spur gear axis by 15.5mm (compared to the midship transmission included), to dramatically lower the chassis center of gravity.
Includes choice of 3-gear or 4-gear midship transmissions. 3-gear transmission shown in the picture delivers sharper throttle response than the 4-gear and is better suited to high-grip track surfaces.
4-gear midship transmission delivers easier control compared to the sharp throttle response of the 3-gear transmission. 3-gear and 4-gear transmission options provide a decisive racing advantage.
Includes sus pins that allow 3 caster angle settings: 0°, 2° and 4°. Precision setting adjustment enables superior cornering and performance over gaps.
Uses the same one-piece steel wheel shafts, hardened ball ends and chrome-moly steel adjustable tie rods as the previous model for superior crash resistance and durability.
Features gull-wing shaped suspension arms that enable maximum possible stroke from the rear shocks. Equipped with medium shock springs for extra rear grip.
■Tread (F/R): 221mm/201mm
■Tire(F/R): sold separately
■Gear Ratio: 2.60 :1 (secondary reduction ratio), Spur 76T/pinion gear sold separately
■Weight: 1,620g (approx.)
■Motor: sold separately
Requirement to Run
・2-channel, 1-servo, 1-ESC R/C System
・Battery for chassis
・Paint for body
・Batteries for transmitter