JETSTREAM 888VE w/KT231P EP(BL) Readyset RTR 40232S
Excl. Tax: ¥68,000 Incl. Tax: ¥74,800

No : 40232S

JAN : 4548565297115

On Sale From : May 2016

JETSTREAM 888VE w/KT231P EP(BL) Readyset RTR 40232S

More Views

Experience the full force of 60km/h speed as soon as you open the box!
Serious offshore racer features auto-recovery from capsize function!

Hit maximum speed of approximately 60km/h with 14.8V 4-cell Li-Po battery (sold separately). The high-performance EP Jet Stream 888VE Readyset features incremental changes and includes Kyosho’s high specification transmitter, receiver and rudder servo combination. In the event of capsize; weight balance is changed by water entering the ballast room to right the hull to its normal posture and automatically drain out allowing the boat to continue running. This unsinkable design removes the risk and worry of losing your boat if it flips over. The high-precision CNC aluminum intake rudder with bracket and the high-durability metal adjustable flaps with excellent wave resistance are retained while the R/C system is upgraded to the KS4031-06W waterproof servo that removes any concerns from flooding and delivers superior response with the Syncro KT-231P transmitter with 130m range for wider control and reliability. The high torque outrunner type brushless motor combines with the waterproof ORION 80A ESC to provide a racing boat experience like no other.

●Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
●Newly designed high-power 80A Team Orion water-cooled ESC features cell auto-detect.
●Pre-installed brushless outrunner water-cooled motor generates excellent torque characteristics.
●Unsinkable self-righting structure.
●Flip-up rudder design prevents damage if boat contacts an obstacle.
●Equipped with combination turn fin and trim tab with adjustable angle.
●Features stopper to prevent loss of shaft.
●Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.

Features ballast compartments built into the sides of the hull that redistribute weight balance so the hull rights itself if capsized.

Tilt angle of the machine cut CNC aluminum variable bracket can be adjusted between 4 ~ -4. W bearing shaft support delivers high efficiency power transfer.

Magnetic lock hatch open/closes without using any tools. Built-in waterproof radio box with double-hatch protects R/C system components from water. Servos are installed and linkage set up is complete.

Brushless outrunner motor and waterproof 80A ESC are pre-installed. Optional ORION set box can to be used to adjust each setting.

Features wire drive that produces optimal propeller angle. Machine cut CNC aluminum rudder features flip-up design to help avoid damage if contact is made.

Stylish 2.4GHz R/C system featuring dual rate function is pre-installed. Also features 4-channel receiver, providing scope for future development.


■Length: 900mm
■Width: 187mm
■Height: 140mm
■Weight: 1,780g (when 14.8V-4000mAh installed)
■Motor: Brushless outrunner water-cooled Aqua Speed Pro BLS3744
■Battery: 3-4 cell 11.1V-14.8V-3600-4000mAh LiPO (Super Plug specification, sold separately)
■Propeller: Carbon reinforced nylon D40 x P1.4 (3-blade)
■ESC: Team Orion water-cooled 80A waterproof ESC

■Servo: KS-4031-06W

<Readyset Contents >
●Pre-colored fully assembled hull
●Water-cooled brushless motor
●Water-cooled 80A ESC
●Rudder servo
●Wire joint drive unit
●Duralumin water instake rudder unit
●Boat stand
●Spare propeller
●Waterproof clear tape
●Syncro KT-231P transmitter
<Required for operation >
●3-4 cell 11.1V-14.8V-3600-4000mAh LiPO battery (Super Plug specification/ compatible size: L138×W42×H33mm)
●Battery charger compatible with balance charging
●4 x AA sized batteries for transmitter